NEWS
REFINE ON| Air quality and gas distribution of dust collector |
| 發布者：Wan He 發布時間：2017/6/16 16:36:03 點擊：2921 |
The dust collector in the process of use if the resistance is too large, it is need to be considered effective to a certain extent, whether it is because of the obstruction caused by the blockage of the filter bag, the main reason is because the dust collector dust and other reasons caused by the too small.
The running resistance of dust collector in the early equipment in the design of the Guo Hengzhong has been decided, but in the process of running, if the equipment resistance increased dramatically in a short time, so that the equipment has occurred, then the need for timely maintenance.
The dust collector needs first to check the quality of compressed air, oil and water are in use, and then the effective check the gas supply pipe is smooth, then check the pulse electromagnetic valve is working properly, whether the fastening bolt effective the loose situation.
In the process of using the dust collector, if the imported gas is unevenly distributed, the equipment will produce great resistance in the process of running, and in the process of using, we should effectively ensure the uniform distribution of the air distribution of the dust collector.
If the collector in the process of running the filtration velocity over bag design standards, it will very easily lead to fine dust in the air inside the bag stuck fiber, this will direct the filter bag blocked, the coated filter material and a protective layer of powder, is a good method.
The pressure loss of the dust collector in the process of using is generally the absolute value of the total pressure of the air flow at the inlet and outlet of the equipment is only poor, so that the mechanical energy consumed by the gas flow through the dust collector. |
| PREVIOUS：Inspection requirements and overload conditions of industrial dust collector NEXT：集塵器的選擇以及風量設計 |
  |